|
Mechanical Characterization
Tinius-Olsen Instruments
- Tensile properties as per ASTM D-638 for solid polymer/polymer blend and for film as per ASTM D-882 from –40°C to 110°C
- Flexural properties as per ASTM D-680
- Gardner Impact as per ASTM D-3029 and D-4226
- Izod/Charpy impact test as per ASTM D-256
- Heat Deflection as per ASTM D-648
|
Dynamic Mechanical Thermal Analyzer (DMTA-IV)
- Film, foam, solid, gel, composite
- 6 different fixtures: single cantilever, dual cantilever, three point bending, compression, tension and shear sandwich
- Temperature range from –40°C to 400°C
- 5 decades range of frequency
- Dynamic properties of polymer such as linear viscoelastic region, elastic (E’) and viscous (E”) modulus and tan d as a function of frequency, time and amplitude
- Glass transition of solid polymer, polymer blend, filled polymer or rubber
- Time Temperature Superposition
- Creep and recovery
- Strain Rate Test
|
Rheometric Solid Analyzer RSA-2
- Rheometric Scientific RSA-2
- Film, fiber, foam, solid, gel, composite
- 7 different fixtures: monofilament fiber, single cantilever, dual cantilever, three point bending, compression, tension and shear sandwich
- Temperature range from –80°C to 400°C
- 5 decades range of frequency
- Dynamic properties of polymer such as linear viscoelastic region, elastic (E’) and viscous (E”) modulus and tan d as a function of frequency, time and amplitude
- Glass transition of fiber, solid polymer, polymer blend, filled polymer or rubber
- Time Temperature Superposition
- Stress Relaxation
- Strain Rate Test
|
For More Information, please contact
Dr. Herman Suwardi
973-642-7947
herman@polymers-ppi.org
|
