Compounding
Twin Screw Extruders
| |
 |
- 15 mm APV Co-rotating, Intermeshing Twin Screw Extruder
- 20 mm Welding Engineers Counter-rotating, Non-intermeshing Twin Screw Extruder
- ZSK 30 W&P Co-rotating, Intermeshing Twin Screw Extruder
- 30 mm Co-rotating Twin Screw Mixing Element Evaluator
- 34 mm Counter-rotating, Intermeshing Twin Screw Mixing Element Evaluator
- LSM34 Leistritz drive with 30 mm Single Screw Extruder Barrel and Screw, 34 mm Segmented Co-and Counter- rotating Intermeshing Twin Screw Extruder Barrel and Screw
- Farrel Continuous Mixer (FCM 2)
|
Single Screw Extruder
 |
|
- 3/4 ” Brabender Single Screw Extruder with: (a) Wire Coating Die; (b) Tube Die; (c) Sheet Die and 3- roll 8" Take-off System with Water Bath.
- 3/4" Brabender Single Screw Extruder with 1" wide Slit Die
- 1" Killion Single Screw Extruder
- 1" MPM Single Screw Extruder with Melt Gear Pump and Fiber Spinerette Die
- 1" Wayne Single Screw Extruder with Rod Die, Water Trough and Pelletizer
|
- 40 mm Betol Single Screw Extruder (Cooling Extruder for Foaming)
- 1.25" Killion Single Screw Extruder with Segmented Barrel and Segmented Screw (20 to 40 L/D), Rod Die
- 1.25” Welex Single Screw Extruder (2)
- 30 mm Single Screw Mixing Element Evaluator
- 1.5" Sterling Single Screw Extruder Blown Film Line with a 4" dia. Die
- 2" Sterling Single Screw Extruder
- 2.5” Welex Single Screw Extruder (2) followed by Gear Pump and Static Mixer
For more information please contact
Dr. Linjie Zhu
(973) 596-3214
lzhu@polymers-ppi.org
|
